Descriptions: This heating cutter is a kind of convenient and practical cutting tool specially for cutting polyester fabrics, such as fiber banner. The fabric hot knife is a hand tool for good cutting. There is no rough burr after cutting. The heat cutter tool is 100W for power saving. The temperature cutting blade can go up to 400°C for which rising to 400°C it takes within 6 seconds. The hot knife is very easy to operate. It's widely used for cutting fiber banner, fabric, foam, etc.Specifications: Voltage: 110V±10% Power: 100WSpeed: AdjustableLength of the Wire: 3MDimension: 24 x 4.5 x 3.5cmPacking Size: 28 x 23 x 8.5cmGross Weight: 1.1kgWarm Tips: 1. The hot knife is 15-second interval cutting, and the time continuously pressing its trigger switch shall not be more than 60 seconds. 2. Don't burn the blade to remove any residue as it may distort the blade. 3. Please don't leave the blade heated in red without cutting. 4. Please don't idly run the blade and always press the trigger switch after blade touching a work piece in order to warm up it for cutting.